Passing an electrical safety check is not a tough task. While performing an electrical change or attempting to locate the source of an electrical problem, electrical safety checks may be required. Electrical inspections can help establish what work has to be done if work is required.
If work was done, the inspection will ensure that it was done safely and that no future issues develop.
An electrical safety assessment for your home may seem inconvenient, but performing an electrical safety inspection on a regular basis and correctly is critical for the protection of your family and property.
After all, it is important for your own safety. In this article, we will discuss various factors that need to be taken care of before you schedule an electrical inspection.
What to Expect From An Inspection?
Once you have decided that an electrical safety check is required, the first step should be to contact your electrical contractor and ask them to schedule an inspection in the coming weeks. Also, make sure to let the contractor know if you’re dealing with an emergency so they can come out sooner.
After everything is decided, your inspector will set a time for them to arrive. Depending on the size and condition of your home as well as the complexity of the potential problem, the inspection might take anywhere from half an hour to two hours.
The inspector typically uses a checklist to ensure that all safety codes are followed during the inspection. Here are some of the major tasks involved in an inspection.
- Identification and correction of electrical fire hazards. It is ensured that the house electrical system is in accordance with the latest safety protocols. Presence of safety equipment like smoke detectors is also checked.
- The overall health of the electrical system is checked and visible issues like underground outlets are observed.
- All the switches, panels, and circuits of the house electrical system are tested. It is ensured that they are in a proper working state and do not have performance or safety issues like overheating.
Things to Take Care of Before an Inspection
Now that we have basic knowledge of how electrical inspections work and why they’re necessary, let’s have a look at what all do you need to check before scheduling an inspection. The following factors should be checked through self-assessment and are crucial in determining the result of inspection.
Wiring Should be in Good Condition
House wiring is one of the most crucial parts of an electrical system. To pass an electrical safety inspection, one of the first things that should be checked is that your cables are in good functioning order.
Faulty wires can lead to fire and should be changed immediately. Replacing all old wires with new ones can be a tough task. It is recommended to call an electrician for this purpose. After upgrading, your home’s electrical system will be a lot more safer and functional.
Proper Lighting in Bathroom and Kitchen
During the inspection, bathrooms are checked extensively. Make sure that all electrical fixtures, faucets and sockets in this area are installed away from water sources and are properly insulated.
Bathroom lights should be coated with a lens and moisture resistant. Using these protections can help in preventing short circuits due to water.
Ensure Proper Installation of Lights and Switches
To get a good rating, light switches must be strategically positioned around the entryway. People require light while entering a room, so switches must be installed where they can be reached easily. Inspectors also examine the placement of lighting fixtures in your stairwells and hallways.
The lighting in these areas should not throw a shadow, as this can lead to mishaps.
Factors That Determine the Result of Inspection
This section focuses on safety regulations that have been evaluated and proven to provide the best protection against fire and electrical risks. The following are the electrical requirements that your home must meet in general.
Tamper Resistant Receptacles (TRRs)
These devices help to keep your children safe from potentially dangerous electrical occurrences. The TRR standard contributes to a long-term solution to injuries caused by non-tamper-proof covers. If your home’s electrical systems do not meet these and other requirements, there are more chances to fail the inspection.
Arc-Fault Circuit Interrupters (AFCIs)
Electrical fires are most frequently caused by arc faults. They were originally mandated in 1999 and have remained so since then. According to surveys, AFCIs are estimated to prevent 50% of electrical fires each year. Hence, this is another important safety feature that your house must-have.
Ground-Fault Circuit Interrupters (GFCIs)
These circuit interrupters are necessary as they can assist in preventing electrocutions in the home. They serve as circuit breakers by trapping electricity and preventing it from injuring people during the event of an overload.
House Renovation
Renovations that entail adding or deleting components of your home, can have a significant impact on your electrical systems. The most affected areas are wiring and circuits. During renovations, dust accumulation can also damage electrical equipment and smoke detectors.
So one should take care of these factors while improving and remodeling their home. In these cases, it is recommended to use an ip20 enclosure to protect your indoor and outdoor electrical components from dust, dirt, and moisture.
Installing New Electrical Appliance
When a new appliance is installed, an electrical inspection is very necessary because of many reasons. The main reason is to verify that there are not any residual issues with your electrical system that could cause the device to malfunction.
House Damage
In case of house damage, electrical networks can be harmed by floods, fires, and earthquakes. Wires would frequently break or fuses and key circuits would burst. This may result in an overload. One should call an electrician before the inspection to repair the house wiring.
Purchasing New House
When buying a pre-owned home, it’s customary to demand a comprehensive electrical safety inspection. If you do not insist on one, make sure to get one done as soon as possible so you don’t run into any complications later. A fire sprinkler system is a simple key active component of a domestic or commercial building’s fire protection system.
Conclusion
It’s crucial to keep yourself safe. You should rely on our experienced technicians to conduct a thorough electrical safety examination in your house.
To avoid putting your home at risk of fire, keep a track of how frequently you use energy on a daily basis, as well as whether your appliances are operating as efficiently as they should.